Hettich ROTANTA 460 R Mode D'emploi page 103

Unpacking 5670
Unpacking 5675
AB5650en
CAUTION
Risk of injury from lifting heavy loads.
−
Provide an adequate number of helpers.
−
Note the weight. See ⮫
on page 10 .
NOTICE
Damage to the device due to improper lifting.
−
Do not lift the centrifuge by the control panel or the
control panel holder.
Personnel:
■
Trained user
1. If present: Remove the packaging tapes.
2. Lift the box up and remove the padding.
3. Remove the accessories and store them safely.
4. Place the device on a stable and level surface.
Personnel:
■
Trained user
4
3
Fig. 23: Unpacking 5670
1 Brake
2 Castors
3 Metal rail
4 Wooden beams
1. Remove the packaging.
2. Remove the wooden beam (
3. Attach the metal rails (
4. Slide the wooden beam (
5. Push up the brake (
6. Carefully roll the centrifuge off the wooden pallet over the metal rails
3 ).
(
7. Push the centrifuge to its installation location.
1 ) on the castors ( 1 ) down to lock it.
8. Push the brake (
Personnel:
■
Trained user
Rev.: 24 / 01.2024
Chapter 3.1 'Technical data'
2
4 ).
3 ) to the wooden pallet using two nails each.
4 ) under the metal rails ( 3 ) to support them.
1 ) on the castors ( 2 ) to release it.
Commissioning
1
2
25 / 73