REBER 9600 N Notice D'utilisation Et Entretien page 41

clockwise direction as long as it is locked.Couple the press to the geared motor
having the screw square part inserted in the square seat of the geared motor.
Tighten the stop nuts.
WARNINGS
- Before carrying out assembly, disassembly, die plate replacement and cleaning
operations, switch off the motor and disconnect the cable with plug, to avoid
risks of electric shock.
- Do not press the dough into the unit with your hands; use the specially-
suppliedpestle.
- After every use disassemble, wash and dry all press parts carefully.
- Clean the die plates by putting them in a warm water bath immediately after use.
- Before use, warm the die plates in warm water (cold die plates produce
irregularlyshaped pasta)
- The pasta obtained can show a darker or lighter colour, according to the amount
of pressure applied when coming out of the unit. When pressure is lower, lighter
pasta will be produced (this happens, for example, when the dough is introduced
into the press too slowly compared with the capacity of the unit). This does not
alter pasta quality and features.
- In case of blockage of the press, disconnect the plug cable from the socket
immediatly to avoid risks of damage the machine.
- Close supervision is required when this product is used near children.
Die Firmenpolitik von Reber basiert auf einer kontinuierlichen Weiterentwicklung
der Produkte hinsichtlich technischen, ecologischen sowie wirtschaftlichen
41