REBER 9600 N Notice D'utilisation Et Entretien page 37

and evenctually grease all the parts that have come into contact with the meat.
Before replacing the appliance it is advisable to put the red cap back on in the
place of the cap with bleed. "Reber" electric meat choppers are fitted for operation
with plates having holes of diameter from 3 mm to 12 mm. Reber snc decline all
liability concerning damage or accidents deriving from using plates having holes of
diameter greater than 12 mm.
GRATER UNIT
Body and handle in aluminium, roller in tin-plated steel and collection drawer in a
plastic material for foodstuffs. The grater is inserted onto the geared motor by
means of an axial revolution multiplier with nylon gears supplied in the package.
USING THE GRATER
Before operate, wash with boiling water and carefully dry all the parts that have
come into contact with the food.When the work is finished, undo the screws (11)
and remove the nylon cover (10) to take out the toothed roller (9) to which are
fixed the pin (4) and the small gear (3). Wash, carefully dry and evenctually grease
all the parts that have come into contact with the food. Before replacing the
appliance it is advisable to put the red cap back on in the place of the cap with
bleed.
DOUGH MIXER UNIT
Dough mixer base in die-cast aluminium alloy; steel bevel reduction gear; mixing
shaft in precision-cast stainless steel AISI 316; mixer container and cover in highly
resistant semitransparent polycarbonate, detachable for easy cleaning (even in
dishwasher). Safety switch preventing the mixer shaft from operating when the
cover is open. Suitable for any kind of dough: pasta, bread, pizza, cakes.
USING THE DOUGH MIXER
The unit is deliverd ready for use, efore operate, wash and carefully dry all the
parts that have come into contact with the food
The conical transmission of the dough mixer is lubricated with specific grease of
Long Life type which doesn't have to be changed or added.
The Accessories start key (13) must be used to let the motor start using the
accessories of the motor other than the dough mixer..
Make sure that the switch is in the position OFF before changing the accessories
and before introducing the blocking of the safety switch.
37