Wheel installation
Wheel installation - A12 axles
Fit the A12 mounting (reduction sleeves, spacers, washers) in the correct dropout, in
the correct order
Ensure the Nordlock washers are facing the correct way before installation. Each pair
of Nordlock washers has a riffled and a toothed side. The sides with teeth
must face each other.
Then fasten the rear wheel in the frame with the A12 fastening screws and the two
Nord-Lock safety screws.
Tighten the fastening screws alternately and in stages evenly with 15 - 20Nm.
60