Rohloff E-14 SPEEDHUB 500/14 Notice Originale page 49

49
The shifter cable tension
The shifter cable tension can be altered by the cable adjusters. Winding the cable ad-
justers out increases cable tension. For the lightest possible gear change, the tension
should be just enough that on the twist shifter there is approx. 2-5mm rotational play
when in a selected gear.
The mark on the twist shifter body can be aligned to the correct gear without altering
the cable tension by winding one cable adjuster in and the other out.
On the versions with an internal gear mech the ca-
ble adjusters are to be found on the cable guide.
This can be found on the left hand chain stay or at-
tached to the left hand brake boss of the frame.
On the versions with an external gear mech the ca-
ble adjusters are to be found on the cable box which
sits directly on the left hand side of the Rohloff
SPEEDHUB 500/14.
When lubricating the chain place a thin thread of lub-
ricant on the outside of the chain over the centre roll-
ers, this process is carried out quicker and easier
when running the chain backwards whilst applying
the lubricant.
To care for the Gates Carbon Drive belt drive,
simply apply UT Belt Care thinly to the running sur-
face of the clean belt
Please check the spoke tension regularly (1000N
with inflated tires)
Wearable parts