Rohloff E-14 SPEEDHUB 500/14 Notice Originale page 56

Wheel removal
Wheel removal OEM version
No loosening of a torque arm is neccessary with these versions. Simply open the quick
release lever (CC versions) or loosen the axle nuts (TS versions) or remove the A12
securing bolts (A12 Version).
Wheel removal OEM2 versions
On the OEM2 versions with Rohloff Monkey Bone, the axle falls out of the dropouts at
the same time as the axle plate seat falls away from the Rohloff Monkey Bone support
point.
On the OEM versions, the axle and the support block
are released together from th e OEM dropout.
On the OEM2 versions with just a support bolt, the
axle falls out the dropout at the same time as the
axle plate seat falls away from the support bolt.
56