Rohloff E-14 SPEEDHUB 500/14 Notice Originale page 41

41
Safety information
Bike riding is fun but it is also tied up with dangers. When your bike is not regularly
maintained and kept in good condition, these dangers increase. These dangers, how-
ever, can be prevented when you read this handbook and the following safety infor-
mation carefully. A incorrect fitment of the vital components could result in a crash, with
possible life threatening injuries.
Mounting
- We recommend all fitting and assembly of our products should be carried out
by a professionally qualified workshop.
- Improper work and customizing may result in malfunction and this in turn could
lead to accidents occuring.
- Please make sure that you have the correct Rohloff SPEEDHUB 500/14 model
for your type of bike frame.
- All the bolts must be secured to the given tightening torques. - The smallest
permitted sprocket ratio must not be undercut.
- If a chain tensioner is in use at the rear, a chain guide must be used in conjunc-
tion up front to prevent the chain from springing off the chainring.
- On rear suspension frames the chain must be kept at a suitable length that al-
lows the rear triangle to move the full amount of shock travel. - When filling the
Rohloff SPEEDHUB 500/14 with oil for the first time as well as when changing
the oil, make sure you use only Rohloff SPEEDHUB oils as recommended for
the Rohloff SPEEDHUB 500/14.
- Rohloff lock-ring carrier required for Gates Carbon Drive use (Lock-ring tight-
ening torque = 30Nm)
- Gates Carbon Drive Rohloff splined Riemenscheibe
Rohloff SPEEDHUB 500/14 CC DB OEM with
Gates Rohloff Splined sprocket, including Gates
Carbon Drive belt and Snubber. Mounted in a frame
with adjustable (Rohloff OEM) dropouts
Instructions gates carbon drive
https://qr.rohloff.de/cden
Safety information