Wilo Control SC-Booster Notice De Montage Et De Mise En Service page 86

Refer to the following table for a description of the
individual menu items. The menu structure is
adapted automatically based on the settings or
Valid until Display
SCe NWB
(p-v)
p-c
SCe NWB
SCe AVC
Installation and operating instructions Wilo-Control SC-Booster (SC, SC-FC, SCe)
the options available in the switchgear, which
means not all menus are always visible.
Description
The main screen shows the status of the system.
The display shows the actual value of the pressure
of the system.
The main screen shows the status of the system.
The display shows the actual value of the pressure
of the system.
The EASY menu only makes it possible to set the
control mode and the 1st setpoint.
The EXPERT menu contains other settings that can
be used for detailed adjustment of the switchgear.
Menu for selecting the required control modes
The "variable pressure" and "constant pressure"
control modes can be selected.
Can only be changed when the drives are switched
off.
The "constant pressure" control mode is currently
the only possible choice.
English
Parameter range
Factory setting
p-c/p-v
p-c
15