Technical Data - Burkert 1067 Manuel Utilisateur

2 DESCRIPTION

2.5 Technical data

Electrical data
Power supply:
Power consumption:
Input for desired value
Input for setpoint for position or process control:
Input for process signal (in case of process control):
Binary input:
Terminations:
Pneumatic data
Control medium:
Dust content
Dew point
Oil content
Pressure range:
Air rates
Inlet valve:
Exhaust valve:
Air consumption by unit
in stable state:
Unions:
(1)
When pressure reduction from 6 to 5 bar
Mechanical data
Regulation range of internal path-measuring system:
Regulation range of external path-measuring system:
Process controller data
Proportional correction value KP:
Reset time TN:
Rate time TV:
Operating point:
Installation and operating data
External dimensions of positioner :
Material of body:
Material of the fluid plate:
Weight of positioner:
Degree of protection:
Operating temperature:
24 VDC ±10%, residual ripple 10%, No industrial DC
< 10 W
- Unit signal 4 ... 20 mA
- Unit signal 0 ... 20 mA
- Unit signal 0 ... 10 V
- Unit signal 4 ... 20 mA
Can be configured as a normally open or normally
closed contact.
2
1.5 mm bolted terminals
Two cable glands
filtered compressed dry air, oiled or non-oiled
class 4,
max. particle size 15 µm,
max. particle density 8 mg/m
class 4 (+3 °C)
class 5, max. 25 mg/m
0 ... 6 bar
(1)
23 Nl / min
(1)
25 Nl / min
0 Nl / min
G 1/8" internal thread
lift turn: 10...80 mm
rotary movement: 0...180°
lift turn: 0...50 mm
0...99,99
0.5...999.9
0.0...999.9
0...100%
125 mm x 80 mm x 80 mm (W x H x D)
Aluminium, lacquered
Aluminium, anodised
Approx. 1 kg
IP 65
0 ... 60 °C
E-8-
POSITIONER 1067
3
3