Configuration Menu - Burkert 1067 Manuel Utilisateur

4 OPERATION

4.5.2 Configuration menu

The configuration menu can be activated from the process control level by pressing the MANUAL/
AUTOMATIC key during 5 seconds. It consists of a main menu and additional menu. The main menu
contains mainly the basic functions which are to be specified on the initial setting up (cf § 4.3). The
additional menu covers all the additional functions which can be selected. It can be reached via the
ADDFUNCT item in the main menu. The equipment functions and parameters can only be specified
within the main menu. If necessary, however, the main menu can be extended by additional functions
from the additional menu, and these can in turn also be specified.
The principle of taking menu items from the additional menu into the main menu is described by figure
25. First select the ADDFUNCT item in the main menu and then press the MANUAL/ AUTOMATIC
key to enter the additional menu. When in the additional menu the „Arrow up" or „Arrow down" keys
can be pressed to set the required additional function. If this additional function is confirmed by
pressing the MANUAL/ AUTOMATIC key, it is then automatically marked with a star (*). All the
functions marked in this way are brought into the main menu after the ENDFUNCT is confirmed. The
additional functions can now be parametered in the main menu expanded in this way, and automatically
activated.
Fig. 28 Principle of integration of additional function in the main menu
Selection of item
ADDFUNCT
Expanded
main menu
To remove additional functions which have brought into the main menu, again select the ADDFUNCT
function and then press the MANUAL/AUTOMATIC key in the additional menu. If only one additional
function marked with a star (
key, it will then be removed from the main menu, and desactivated..
Fig. 26 shows the complete configuration menu with all the basic and additional functions. Continued
selection in the vertical direction is achieved by pressing the appropriate arrow keys. Press the
MANUAL/AUTOMATIC key to move in the horizontal direction.
Setting numerical values in the appropriate menu items is achieved by pressing the „Arrow up" key
once or several times (increment numerical value) or the „Arrow down" (decrement numerical value).
In the case of 4-digit numbers, only the flashing position can be set using the „Arrow keys". Pressing
the MANUAL/AUTOMATIC key changes to the next position.
Confirmation of
Main menu
selected item
Return to expanded
main menu
*
) is now selected and confirmed by pressing the MANUAL/AUTOMATIC
E-25-
POSITIONER 1067
Additional menu
Confirmation of selected
additional functions for
importation in main menu