Part E - Service And Warranty; Appendix 1: Trophon Epr Technical Specifications, N00010, N00020, N03000 & N04000 - Nanosonics trophon EPR Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 46
PART E – SERVICE AND WARRANTY
Contact your Nanosonics representative if you have any questions about:
The trophon EPR or accessories
The warranty
Each trophon EPR has a comprehensive warranty against defects in material and workmanship for 12
months from the date of delivery.
Service Schedule: When due, this will be indicated prior to commencing a disinfection cycle by the
screen message: Device Service Due, at weekly intervals until a service is performed. Service
intervals can also be accessed via the System Information, located in the trophon EPR LCD menu.
NOTE: Use only authorised service personnel to service the trophon EPR.
Modifying the trophon without authorisation will void your warranty.
APPENDIX 1: TROPHON EPR TECHNICAL SPECIFICATIONS, N00010, N00020,
N03000 & N04000
N00010 Electrical
Specification
N00020 Electrical
Specification
N03000 Electrical
Specification
N04000 Electrical
Specification
Data port
Environmental Specification
Storage and Transport
Conditions
Physical Characteristics
Electromagnetic Compliance
L00049 5.0 03/2017
Rated mains input voltage: 120V AC
Rated mains input current: 5Amp, 50/60Hz
Mains Inlet: IEC type C13
Equipment must be connected to an earthed outlet
using power cable supplied with the trophon.
Rated mains input voltage: 230V AC
Rated mains input current: 5Amp, 50/60Hz
Mains Inlet: IEC type C13
Equipment must be connected to an earthed outlet
using power cable supplied with the trophon.
Rated mains input voltage: 230V AC
Rated mains input current: 5Amp, 50/60Hz
Mains Inlet: IEC type C13
Equipment must be connected to an earthed outlet
using power cable supplied with the trophon.
Rated mains input voltage: 100V AC
Rated mains input current: 6A, 50/60Hz
Mains Inlet: IEC type C13
Equipment must be connected to an earthed outlet
using power cable supplied with the trophon
Type: RS232
Connector: DB9 socket
Operating temperature range: 17 to 27
o
80.6
F
Enclosure rated to IP20
Temperature range: -20
Weight of unpacked trophon: 17kg
Dimensions of trophon: 485mm high x 345mm wide x
320mm depth
The trophon has been tested and found to comply with
the limits for emission (electromagnetic Interference)
pursuant to EN61326-1:2013 (CISPR 11 Group 1 Class
B limits)
0
C / 62.6
o
o
o
C to +60
C / -4
F to +140
o
F to
o
F
18

Publicité

Table des Matières
loading

Table des Matières