Part G - Service Requirement And Warranty Provision; Appendix 1: Trophon2 Technical Specifications N05000 - Nanosonics trophon 2 Mode D'emploi

PART G – SERVICE REQUIREMENT AND WARRANTY PROVISION
Contact your trophon2 representative if you have any questions about:

The trophon2, consumables or accessories

The warranty
Each trophon2 has a comprehensive warranty against defects in material and workmanship for 12
months from the Date of Purchase. The specific warranty terms and conditions are defined in appendix
2 of this manual. Please be aware of the exclusions.
To ensure the safety and efficacy of your HLD operations, trophon2 requires a preventative service
every 12 months and a major service at every 5000 cycles.
Service Schedule: When trophon2 is due for service, a service due message will be displayed on the
screen to prompt service arrangements. The message will be indicated prior to commencing a HLD
cycle at weekly intervals until a service is performed. Service due information can also be accessed by
selecting:

Menu Maintenance
Nanosonics has made the service provision available to customers through either our direct service or
our service partners including local distributors who have been trained and authorised to service
trophon2. Only authorised customer service or suitably trained personnel should service the trophon2
with genuine parts supplied from Nanosonics.
Modifying the trophon2 without authorisation will void your warranty.

APPENDIX 1: TROPHON2 TECHNICAL SPECIFICATIONS N05000-2

N05000-2 Electrical
Specification
Data port
Environmental Specification
Storage and Transport
Conditions
Physical Characteristics
Electromagnetic Compliance
L03065 2.0 9/2019

Service data.
Rated mains input voltage: 230V AC
Rated mains input current: 6Amp, 50/60Hz
Mains Inlet: IEC type C13
Equipment must be connected to an earthed outlet
using the power cable supplied with the trophon2.
Ethernet connector RJ45
USB Port: Type A
Operating temperature range: 17 to 27
o
80.6 F
Temperature range: -20
Weight of trophon2:
Unpacked: 22kg (48.5lbs)
Packed: 25kg (55lbs)
Dimensions of trophon2:
535mm high x 360mm wide x 317mm depth
(21in high x 14.2in wide x 12.5in depth)
The trophon2 has been tested and found to comply with
the limits for emission (electromagnetic Interference)
pursuant to EN61326-1:2013 (CISPR 11 Group 1 Class
B limits)
0
C / 62.6
o o o
C to +60 C / -4 F to +140
o
F to
o
F
24