Internal Cable Routing; Carbon Frame - Speacialized Turbo Levo Manuel Utilisateur

Remove the upper shock eye bolt and compress the suspension. Wrap the seat tube with some protective
„
material to prevent the link from hitting the seat tube.
10.1
Fig. 10.1: Install the tubes in the head tube exit port. The softer nylon tube goes in the upper hole for the brake
„
housing, and the harder nylon tube goes in the lower hole for the shift housing.
Fig. 10.1: Install the set screw.
„
Fig. 10.1: Insert the nylon tubes through the head tube ICR entry port, through the top tube, down the side arm
„
and out the motor cavity (Fig. 10.2).
Fig. 10.1: Seat the exit port in the head tube cavity, then install the exit port screw and torque to 7 in-lbf / 0.8 Nm.
„
10.2
23

10. INTERNAL CABLE ROUTING

10.1. CARBON FRAME

DERAILLEUR TUBE BRAKE TUBE