Speacialized Turbo Levo Manuel Utilisateur page 24

9.6
Fig. 9.6: Grease, then place the two outer spacers (with seals against the bearing) and two inner spacers
„
(conical, tapered surface against the bearing) against the link bearings.
Fig. 9.6: AIign the seatstay tabs with the link pivot bearings and spacers, then insert the pivot bolts.
„
9.7
Fig. 9.7: Grease, then place the main pivot spacers against the main pivot bearings (seal against the bearing).
„
Fig. 9.7: Align the chainstay tabs with the main pivot bearings and spacers, then insert the axle.
„
21
SEATSTAY @ LINK
MAIN (BOTTOM BRACKET)