System Interface; Handlebar Remote; Support Modes - Speacialized Turbo Levo Manuel Utilisateur

The handlebar remote is included on all LEVO models (Fig. 7.1) and controls the level of motor support.
7.1
WALK-ASSIST
TURBO BOOST BUTTON: Automatically changes to TURBO mode regardless of the mode the bike is in.
„
+ BUTTON: Increases the amount of support.
„
- BUTTON: Decreases the amount of support.
„
WALK-ASSIST BUTTON: Pressing and holding activates the walk-assist mode. This provides motor assist at
„
3.7 mph / 6 km/h to help push the bike up hills when walking.
The LEVO motor offers five different drive settings. TURBO,
TRAIL, ECO, OFF and SMART CONTROL.
TURBO MODE: Maximum power mode for faster
„
trails, flat sections and climbing.
TRAIL MODE: Off-road mode for maximum control,
„
with sufficient power on demand.
ECO MODE: Most efficient mode for maximum range
„
while offering good power on trials.
OFF MODE (Long press the MODE button): Turns
„
motor off, while keeping systems on for connected
devices.
SMART CONTROL MODE: The motor, while
„
pedaling, adjusts the power output based on the ride
parameters determined in the Mission Control app.
The various modes are managed using either the +/-
buttons on the remote (Fig. 7.1) or the S-button (MODE) on
the TCU display (Fig. 7.2).
On the remote, after reaching the strongest or weakest
mode, the system will not continue to switch. To reduce
from TURBO to TRAIL to ECO, you have to press the -
button. To increase from ECO to TRAIL to TURBO, you have
to press the + button.
On the TCU display, the modes will cycle through the
three main support modes, starting at TRAIL (default). TRAIL > TURBO > ECO > TRAIL > TURBO...
9

7. SYSTEM INTERFACE

7.1. HANDLEBAR REMOTE

7.2. SUPPORT MODES

7.2
TURBO BOOST
CONTROL
TURBO
TRAIL
ECO
OFF
SMART