Speacialized Turbo Levo Manuel Utilisateur page 22

9.2
Fig. 9.2: Grease, then place the spacers against the inner surface of the link @ seat tube bearings (tapered
„
surface against the bearing).
Fig. 9.2: Align the link with the seat tube pivot, then insert the pivot bolts.
„
Place a small rag between the link and seat tube to prevent any damage to the seat tube.
9.3
Fig. 9.3: Place the extension around the seat tube, then align the upper shock eye with the frame mount.
„
Fig. 9.3: Insert the upper shock eye bolt.
„
19
LINK @ SEAT TUBE
SHOCK @ UPPER SHOCK EYE MOUNT