Télécharger Imprimer la page

Stihl FSA 200.0 R Notice D'emploi page 26

Les langues disponibles

Les langues disponibles

English
approved combination of cutting attachment
and deflector to maximize cutting performance
and reduce the risk of serious personal injury
from thrown objects or contact with the cutting
attachment,
27.1.
All deflectors are mounted to the gearbox in the
same way. To mount a deflector:
► Switch off the power tool,
► Remove the battery,
2
► Push the deflector (1) into the guides on the
gearbox until it stops. The deflector must be
tight against the gearbox.
► Insert and tighten the screws (2). Ensure that
the deflector is tight and will not move during
operation.
To mount the skirt and line limiting blade:
1
► Insert the guide ridge on the bottom of the
deflector (1) into the groove on the skirt (2).
► Slide the skirt until it covers the entire bottom
of the deflector and clicks into place.
When the skirt is properly installed, it will cover
the pictogram embossed on the deflector indi‐
cating that use with mowing heads is prohibi‐
ted.
14.3.2
Removing a Deflector
To remove a deflector:
► Switch off the power tool,
► Remove the battery,
26
17.2.
16.2.
1
2
17.2.
16.2.
14 Assembling the Trimmer / Brushcutter
2
► Remove the screws (2).
► Remove the deflector (1).
To remove the skirt from the deflector:
► Insert the stop pin (2) in the hole in the skirt.
► Slide the skirt (1) off the guide ridge at the bot‐
tom of the deflector.
14.4
Mounting and Removing a
Mowing Head
14.4.1
Mounting a Mowing Head
WARNING
■ Use of wire or metal-reinforced line is not
authorized and could be extremely dangerous.
Use only the cutting attachments recommen‐
ded in this manual, in combination with the
recommended deflector,
WARNING
■ A damaged or loose cutting attachment or
mowing head may vibrate, crack, break or
come off the trimmer / brushcutter, which may
result in serious or fatal injury or property dam‐
age. Make sure the mowing head and cutting
attachment are properly tightened and in good
condition before starting work,
To mount a mowing head:
► Switch off the power tool,
► Remove the battery,
1
2
1
6.6.4.
6.6.4.
17.2.
13.1.
0458-041-8201-A
loading