Stihl FSA 200.0 R Notice D'emploi page 12

English
► Use only attachments supplied or expressly
approved by STIHL.
► Never modify this trimmer / brushcutter in
any way.
► Never attempt to modify or override the
trimmer's / brushcutter's controls or safety
devices in any way.
► Never use a trimmer / brushcutter that has
been modified or altered from its original
design.
► For a list of cutting attachments authorized
by STIHL for your unit, along with the
approved deflector, handle and harness
configurations, see Chapter
instruction manual or the STIHL "Cutting
Attachments, Parts & Accessories" catalog,
available from your dealer or at www.stih‐
lusa.com.
■ If the power tool or battery is dropped or sub‐
jected to similar heavy impacts:
► Check that it is undamaged, in good condi‐
tion and functioning properly before con‐
tinuing work.
► Check that the controls and safety devices
are working properly.
► Check the LEDs on the battery for error
messages, 25.
► Check that the battery has not been dam‐
aged. Never use or charge a malfunction‐
ing, damaged, cracked, leaking or
deformed battery.
► Never work with a damaged or malfunction‐
ing power tool or battery. In case of doubt,
have the power tool and battery checked by
your authorized STIHL servicing dealer.
■ If the power tool or battery is damaged, not
working properly, has been left outdoors and
exposed to rain or damp conditions, or drop‐
ped into water or other liquid, its components
may no longer function properly and safety
devices may be inoperative. To reduce the risk
of personal injury and property damage:
► Take the power tool and battery to your
authorized STIHL servicing dealer to be
checked before further operation.
■ Genuine STIHL replacement parts are specifi‐
cally designed to match your power tool and
meet safety and performance requirements.
Use of parts that are not authorized or
approved by STIHL may cause serious or fatal
injury or property damage.
► STIHL recommends that only identical
STIHL replacement parts be used.
12
6.6
6.6.1
■ Misuse or unauthorized use may result in per‐
sonal injury and property damage.
► Use the trimmer / brushcutter only as
■ The cutting attachment and deflector must be
an approved combination.
27 of this
► Read and follow the instructions on select‐
■ The cutting attachment must be properly
installed and tightened before starting work.
Failure to use the proper parts to mount the
cutting attachment may cause the blade or
mowing head to fly off and seriously injure the
operator or bystanders.
► Read and follow the instructions on mount‐
► Never mount a cutting attachment to the
► Before starting work, inspect for loose parts
► Replace damaged or worn out heads or
► Always keep metal cutting attachments
■ Using only an approved combination of cutting
attachment and deflector is extremely impor‐
tant to maximize cutting performance and
reduce the risk of personal injury from thrown
objects or contact with the cutting attachment:
► To reduce the risk of serious injury, never
■ Using a trimmer / brushcutter that is modified,
damaged, improperly adjusted or maintained,
or not completely and securely assembled can
6 IMPORTANT SAFETY INSTRUCTIONS
Using the Trimmer / Brushcut‐
ter
Before Operation
WARNING
described in this instruction manual.
► Do not use circular saw blades on
this trimmer / brushcutter.
ing the proper cutting attachment and
deflector, 27.1.
ing the cutting attachment, deflector and
handle, 14.
trimmer / brushcutter without the proper
installation of all required parts (e.g., nuts,
screws, thrust washer, thrust plate, etc.).
(nuts, screws, etc.) and for a cracked or
damaged head or a cracked, bent, warped
or damaged blade. Ensure the mowing
head or nut that secures the blade is tight‐
ened firmly.
blades before using the power tool.
sharp.
use wire or metal-reinforced line or other
material in place of the recommended nylon
cutting line. Pieces of wire could break off
and be thrown at high speed toward the
operator or bystanders.
0458-041-8201-A