Whirlpool WOI7A8FPT1SBA Manuel Du Propriétaire page 6

DAILY USE
1. SELECT A FUNCTION
Press to switch on the oven: the display will show
the last running main function or the main menu.
The functions can be selected by pressing the icon
for one of the main functions or by scrolling through
a menu: To select an item from a menu (the display
will show the first available item), press
select the desired one, then press
2. SET THE FUNCTION
After having selected the function you require, you
can change its settings. The display will show the
settings that can be changed in sequence. Pressing
allows you to change the previous setting again
TEMPERATURE / GRILL LEVEL / STEAM LEVEL
TEMPERATURE
When the value flashes on the display, press
or to change it, then press
continue with the settings that follow (if possible).
In the same way, it is possible to set the grill level:
There are three defined power levels for grilling: 3
(high), 2 (mid), 1 (low).
In "Forced Air + Steam" function, you can select the
amount of steam from the following values: STEAM 1,
STEAM 2.
Please note: Once the function has been activated, the
temperature/grill level can be changed using
DURATION
DURATION
When the icon flashes on the display, press
or to set the cooking time you require and
then press to confirm. You do not have to set
the cooking time if you want to manage cooking
manually (untimed): Press
start the function. By selecting this mode, you cannot
program a delayed start.
Please note: You can adjust the cooking time that has
been set during cooking by pressing
to amend it and then press
END TIME START DELAY
In many functions, once you have set a cooking time
you can delay starting the function by programming
its end time. The display shows the end time while the
icon flashes.
END TIME
Press or to set the time you want cooking
to end, then press
or
to confirm.
to confirm and
or to confirm and
: press
to confirm.
to confirm and activate the
function. Place the food in the oven and close the
door: The function will start automatically after the
period of time that has been calculated in order for
cooking to finish at the time you have set.
Please note: Programming a delayed cooking start time
will disable the oven preheating phase: The oven will
reach the temperature your require gradually, meaning
to
that cooking times will be slightly longer than those
listed in the cooking table. During the waiting time, you
can press
time or press
, in order to visualize information, it is possible to
switch between end time and duration.
. 6 SENSE
TH
These functions automatically select the best cooking
mode, temperature and duration to cook, roast or
bake all the dishes available.
When required, simply indicate the characteristic of
food to obtain an optimal result.
WEIGHT / HEIGHT ROUND TRAY LAYERS
KILOGRAMS
To set the function correctly, follow the indications on
the display, when prompted, and press
set the required value then press
DONENESS / BROWNING
In some 6 Sense functions it is possible to adjust the
th
or .
doneness level.
DONENESS
When prompted, press
desired level between rare (-1) and well done (+1).
Press or
In the same way, where allowed, in some 6
functions, it's possible to adjust the browning level
between low (-1) and high (+1).
. COOKING WITH STEAM
By selecting the "Steam" or "Forced Air + Steam"
or inside the Manual Functions or one of the several
6 Sense dedicated recipes it is possible cook any
th
kind of food thanks to the use of the steam. Steam
spreads more quickly and more evenly through food
compared to just the hot air typical of Conventional
Functions: this reduce cooking times, locking in food's
precious nutrients and ensuring you obtain excellent,
truly delicious results with all your recipes. Through
the complete duration of the steam cooking the door
must be kept closed.
To proceed with steam cooking, it will be necessary
to provide water to the boiler located inside the oven
using the extractable drawer on the control panel.
When requested on the display with "ADD WATER"
or to amend the programmed end
to change other settings. By pressing
or to select the
to confirm and start the function.
or to
to confirm.
Sense
th