FIRST TIME USE
1. SELECT THE LANGUAGE
You will need to set the language and the time
when you switch on the appliance for the first time:
"English" will show on the display.
ENGLISH
Press
or
to scroll through the list of available
languages and select the one you require. Press
to confirm your selection.
Please note: The language can subsequently be changed
by selecting "LANGUAGE" in "SETTINGS" menu, available by
pressing
2. SET THE POWER CONSUMPTION
The oven is programmed to consume a level of
electrical power that is compatible with a domestic
network that has a rating of more than 3 kW (16): If
your household uses a lower power, you will need to
decrease this value (13).
POWER
Press
or
to select 16 "High" or 13 "Low" and
press
to confirm.
3. SET THE TIME
After selecting the language, you will need to set the
current time: The two digits for the hour will flash on
the display.
CLOCK
Press
or
to set the correct hour and press
: The two digits for the minutes will flash on the
display. Press
or
to confirm.
Please note: You may need to set the time again following
lengthy power outages. Select "CLOCK" in "SETTINGS" menu,
available by pressing
to set the minutes and press
4. SET THE WATER HARDNESS LEVEL
In order to allow the oven to work efficiently, and
to guarantee that it regularly prompts the user to
perform Descale cycle when needed, it is important
to set the correct water hardness level. To set it,
switch on the oven by pressing
Settings and use navigation buttons
to select "WATER HARDNESS". Press
Use navigation buttons
correct level for the water of your area, based on the
following table:
WATER HARDNESS LEVELS TABLE
Level
German
degrees
1
Very soft
2
Soft
3
Mid
4
Hard
5
Very hard
Press
to confirm.
For Water Hardness level, "Hard" is preset.
5. HEAT THE OVEN
A new oven may release odours that have been left
behind during manufacturing: This is completely
normal.
Before starting to cook food, we therefore
recommend heating the oven with it empty in
order to remove any possible odours. Remove any
protective cardboard or transparent film from the
oven and remove any accessories from inside it. Heat
the oven to 200 °C for around one hour, ideally using
a function with air circulation (e.g. "Forced Air" or
"Convection Bake").
Please note: It is advisable to air the room after using the
appliance for the rst time.
, press
and
to confirm.
and
to select the
°dH
°fH
French
degrees
0-6
0-10
7-11
11-20
12-16
21-29
17-34
30-60
35-50
61-90
°Clark
English
degrees
0-7
8-14
15-20
21-42
43-62