Maintenance Schedule - Ryobi RIG2000PC Manuel D'utilisation

MAINTENANCE SCHEDULE

Check engine lubricant
Change engine lubricant
Check air fi lter
Clean air fi lter
Change air fi lter
Check/adjust spark plug
Replace spark plug
Check/adjust idle speed
Check/adjust valve
1
clearance
1
Clean fuel tank and fi lter
Check fuel hose
Fuel fi lter
Check all hose connections
Inspect fuel tank vapor vent
(if equipped)
Inspect carbon canister
(CARB models only)
1. These items should only be carried out by an authorised service centre.
NOTE: Maintenance should be performed more frequently when generator is used in dusty areas.
When generator has exceeded the maximum figures specified in the table, maintenance should still be cycled
according to the intervals of time or hours stated herein.
English (Original instructions)
MAINTENANCE
After 1st month
Before
or 20 hours of
each use
operation




Inspect



35
Every 3 months Every 6 months
or 50 hours of or 100 hours
operation of operation




Every year or
after 300 hours
of operation





Replace


