Reely SKY R222 Notice D'emploi page 75

Switching exponential function on and off:
• Switch on the transmitter.
• Then press the "Enter" button to enter the programming
menu.
• The menu item "ELEV" and the set value "REV" are flash-
ing.
• Use the "UP/DN" button to select the control function
"AUX". The display "AUX" flashes in the display, as well
as the corresponding switching state "ON" or "OFF".
• Use the "L/R" input button to change the current state from
"ON" to "OFF" or from "OFF" to "ON".
• For saving the set value, confirm again with the "Enter"
button.
• To leave the programming mode, press the "EXT" button.
If you enter the programming menu again with the "Enter" button without switching the transmitter off and
on again in between, the last menu item used will be shown again.
All manuals and user guides at all-guides.com
Figure 27
75