Reely SKY R222 Notice D'emploi page 73

Proceed as follows:
• Switch on the transmitter.
• Then press the "Enter" button to enter the programming
menu.
• The menu item "ELEV" and the set value "REV" are flash-
ing.
• Use the "UP/DN" button to select the control function, e.g.
for the tail function ("RUDD"), where you want to change
the reaction direction.
• With the "L/R" input button you can now adjust the re-
quired value from NOR to REV or vice versa.
• For saving the set value, confirm again with the "Enter"
button.
• To leave the programming mode, press the "EXT" button.
If you enter the programming menu again with the "Enter" button without switching the transmitter off and
on again in between, the last menu item used will be shown again.
All manuals and user guides at all-guides.com
Figure 25
73