Reely SKY R222 Notice D'emploi page 63

Tail Function
By turning the main rotor clockwise (seen from the top), a torque acts on the fuselage of the helicopter to turn it
anticlockwise. Therefore, the tail rotor is built to counter this rotation of the fuselage. If the control stick for the tail
function (see figure 1, item 13) is in the centre position, the tail rotor speed is automatically high enough for the
helicopter to hover stably in the air without rotating around the vertical axis (rotor shaft).
If the control stick is moved to the left, the tail rotor speed is decreased and the helicopter fuselage top points to the left.
If the control stick is moved to the right, the tail rotor speed is increased and the helicopter fuselage top points to the
right.
Roll Function
The roll function allows you to move your model helicopter sideways to the right and to the left (see figure 15). The
control is effected with the right control stick (see figure 1, item 4).
If the lever is steered slightly towards the left, the model drifts sideways to the left.
If you steer to the right, the model drifts sideways to the right.
All manuals and user guides at all-guides.com
Figure 14
Figure 15
63