Reely SKY R222 Notice D'emploi page 74

All manuals and user guides at all-guides.com
c) Exponential Function (AUX)
The exponential function, which can be switched on, can be used to change
the linear coupling between the controller and the servo path (dashed line
in the sketch in figure 26) in the central position nod, roll and tail control.
When the exponential function is activated, the nod and roll servos react
with reduced motions in the central area of the controller (see continuous
line in the sketch in figure 26). The maximum possible servo path at full
deflection of the control stick remains present, however.
If the exponential function is activated, the speed change in the control-
ler's central area is reduced at the tail rotor.
The exponential function thus enables fine directional changes in hover
flight, with maximum model manoeuvrability being retained.
Figure 26
The exponential value is set ex works and cannot be changed. It affects
both the nod and roll servos and all control directions.
74