Reely SKY R222 Notice D'emploi page 71

Changing the Control Stick Assignment:
• Switch on the transmitter.
• Then press the "Enter" button to enter the programming
menu.
• The menu item "ELEV" and the set value "REV" are flash-
ing.
• Use the "UP/DN" button to select the control function
"STICK MOD".
• Use the "L/R" button to select mode 1, 2, 3 or 4.
• For saving the set value, confirm again with the "Enter"
button.
• To leave the programming mode, press the "EXT" button.
Please observe that modes 1 and 3 require that the pitch control stick catch is moved from the left to the
right. The exact procedure was already described in chapter "Operation of the Model Helicopter" in section
"Modifying the Stick Assignment of the Transmitter".
If you enter the programming menu again with the "Enter" button without switching the transmitter off and
on again in between, the last menu item used will be shown again.
All manuals and user guides at all-guides.com
Figure 24
71