Electrical Connection - IMEON ENERGY IMEON 9.12 Guide De Montage

4.3 Electrical connection

WARNING: To prevent any risk of electric shock, make sure that the ground cable is correctly
connected to the earth ground before switching on and using the inverter.
Source
PV
FR
FR
EN
Grid
Battery
AC output
Ground
WARNING: These values are provided solely for guidance. It is necessary to calculate again the
cable cross section, according to the current and to the cable length.
98
IMEON 9.12
Designation
PV1 + A : + (MC4 type)
PV1 - A : - (MC4 type)
PV2 + B : + (MC4 type)
PV2 - B : - (MC4 type)
L1 C : L1 (RST)
L2 C : L2 (RST)
L3 C : L3 (RST)
N C : N (RST)
Ground C : (RST)
BAT + F : POS +
BAT - F : NEG -
L1 D : L1 (RST)
L2 D : L2 (RST)
L3 D : L3 (RST)
N D : N (RST)
Ground D : Grd (RST)
Ground E: Ground
Guide de montage / Installation guide IMEON 9.12 – Rev A.8
Connectors Suggestion of cable
6mm2 solid cable
4mm² stranded cable
2
95mm stranded cable
6mm2 solid cable
4mm² stranded cable
6mm2 solid cable
4mm² stranded cable