7.3.7 Local installer
Local installer tab allows to configure WiFi, reboot the system (Intelligence reboot), restore the factory
settings (Default settings), or log out from the manager (Logout).
FR
FR
EN
1. WiFi
The WiFi status (OFF or ON) allows to activate or deactivate the WiFi. If the WiFi network is
OFF, only the Ethernet can be used to connect to the inverter.
Press « List connection » to scan the list of available SSID and press « Select » to connect.
The interface allows to change SSID, activate or deactivate encryption and change password
of the access point.
2. About your IMEON
This interface shows informations about your inverter.
Press « Reboot » to restart the communication part of the inverter.
Press « Reset Manager » to restore default settings.
126
IMEON 9.12
Guide de montage / Installation guide IMEON 9.12 – Rev A.8