Overview Of Imeon 9.12 Inverter; Connections; Connections Of The Communication Part - IMEON ENERGY IMEON 9.12 Guide De Montage

3. Overview of IMEON 9.12 inverter

3.1 Connections

All the connection terminals are located at the bottom of the inverter.
.
FR
FR
EN
AC
Output/Backup

3.2 Connections of the communication part

The inverter is equipped with several communication ports: RS485, Ethernet, CAN, USB, Wifi, RELAY and
sensor ports (Ecap, Tcap).
-
-
-
-
-
-
-
-
94
IMEON 9.12
Grid Communication Ports
PV Input 1 and 2
RS485: to communicate with specific devices
Ethernet: to connect with a local area network
WiFi: to connect with a wireless network (router, PC, mobile...)
CAN: to communicate with lithium batteries (only batteries compatible with IMEON)
USB: to communicate with an USB device
RELAY: to control a diesel generator
Tcap: temperature sensor
Ecap: current sensor
Guide de montage / Installation guide IMEON 9.12 – Rev A.8
Battery
+
PV Breaker
-
Earth Ground