IMEON ENERGY IMEON 9.12 Guide De Montage page 103

Step 5: Make sure that the cables are correctly crimped.
Step 6: Two PV input are available. Connect each input to the corresponding PV INPUT N°1 and PV
INPUT N°2.
PV1 Input
Connect negative pole (-) of connection cable to negative pole (-) of PV input connector.
Connect positive pole (+) of connection cable to positive pole (+) of PV input connector.
Refer to the pictures below:
Manuel d'installation / Installation guide IMEON 9.12 – Rev A.8
IMEON 9.12
1
3
PV2 Input
2
FR
FR
EN
4
103