Display By Indicator Light; Button Definition - IMEON ENERGY IMEON 9.12 Guide De Montage

FR
FR
EN

5.2 Display by indicator light

5.3 Button definition

Button
110
IMEON 9.12
/ /
> Change the indicators clockwise.
> Change the unit of the selected indicator.
> Change the indicator counterclockwise.
> Change the unit of the selected indicator.
> Select the indicator.
> Confirm the choice of the indicator.
> Hold the button for 3 seconds until the buzzer sounds to activate the AC
OUTPUT.
> Go back to the previous indicator or exit the indicator.
> Hold the button for 3 seconds until the buzzer sounds to deactivate the AC
OUTPUT.
Guide de montage / Installation guide IMEON 9.12 – Rev A.8
Indicates the PV MPPT P1 and P2 of both MPPT
trackers. If any of the icons flashes, that means
that the dedicated array is unavailable.
Indicates the grid.
If the icon flashes, that means the grid is
unavailable.
Indicates the battery state of charge.
- Left icon : battery fully charged
- Center icon: If the icon flashes, that means
the battery is unavailable
- Right icon: battery has a low voltage
Indicates that the AC OUTPUT is activated and
the delivery of power to the load.
Indicates the Output power level
Indicates an overload
Indicates that IMEON is up and running
Indicates an anomaly in the system
Function