Electrical Connection; Smart Meter Installation - IMEON ENERGY 3.6 Manuel D'installation

IMEON INVERTER

3.4 Electrical connection

WARNING: To prevent any risk of electric shock, make sure that the ground cable is correctly
connected to the earth ground before switching on and using the inverter.
Source Designation
PV1 +
PV1 -
PV
PV2 +
PV2 -
Earth
N
Grid
L1
L2
L3
BAT +
Battery
BAT -
Earth
N
AC BACKUP
L1
L2
L3
Earth Earth
WARNING: These values are provided solely for guidance. It is necessary to calculate again the
cable cross section, according to the current and to the cable length.

3.5 Smart Meter Installation

1. The energy meter must be installed between
the IMEON inverter and the Public Grid.
Manuel d'installation / Installation guide IMEON Inverter/ Guia de montaje – Rev C.14
Suggestion of cable
Connector
for IMEON 3.6
+ (type MC4)
6mm² stranded cable
4mm² solid cable
- (type MC4)
+ (type MC4)
- (type MC4)
(RST)
6mm² stranded cable
N (RST)
4mm² solid cable
1 (RST)
2 (RST)
L (RST)
POS +
33mm2 stranded cable 95mm2 stranded cable
NEG -
(RST)
6mm² stranded cable
N (RST)
4mm² solid cable
1 (RST)
2 (RST)
L (RST)
6mm² stranded cable
Earth
4mm² solid cable
Figure - Smart Meter cabling / IMEON 9.12
Suggestion of cable
for IMEON 9.12
6mm² stranded cable
6mm² solid cable
6mm² stranded cable
6mm² solid cable
6mm² stranded cable
4mm² solid cable
65
FR
FR
EN
ES