Identification; Description Of Imeon Os. One; " Settings " Page - IMEON ENERGY 3.6 Manuel D'installation

6.2 Identification

FR
FR
EN
ES
Warning: If the connection is established but the access to the identification page is unavailable,
please refer to the annex « IP address modification » in order to set an automatic IP (DHCP).

6.3 Description of IMEON OS. ONE

WARNING: Before performing any modifications, make sure that you follow the applicable
standards in your country. Only the IMEON OS. ONE interface can be used for configuration of
IMEON inverters. The use of any software other than IMEON OS.ONE is not authorized by
IMEON ENERGY and may cause irreversible damage affecting the operation of IMEON
inverter.
6.3.1
The dashboard page allows viewing the real time distribution of the energy sources feeding the load,
as well as the evolution of the self-production rate, the status of the battery and the overview of the
energy flow.
6.3.2 « Settings » page
The "settings" page allows you to change the setting of the inverter.
Each parameter has its explanation. Click
After modification of a parameter, it is necessary to click
In case of any doubt about the inverter‟s parameters, a refresh of the page (F5 keyboard key) will reload
all the inverter‟s parameters.
Refer to the annex "Mode of operation" for more information on different modes of operation.
Note: A more advanced setting is possible (voltage, current setting) with a different connection code
held by your distributor.
84
Manuel d'installation / Installation guide IMEON Inverter/ Guia de montaje – Rev C.14
IMEON INVERTER
"Dashboard" page
Login using the below information depending
on the profile:
User profile :
Usage: Allows access to a simplified interface
Email: user@local
Password: password
Installer profile:
Usage: Allows access to an interface with
some additional parameters
Email: installer@local
Password: Installer_P4SS
icon for more information.
icon in order to confirm your choice.