Inverter Internet Access : Monitoring; Configuration For Ethernet Connection - IMEON ENERGY 3.6 Manuel D'installation

7. Inverter Internet access : MONITORING

The MONITORING is a Web-based application for remotely viewing the real time as well as historical
photovoltaic plant performance data.
This application requires an unlimited connection to the Internet, the subscription of which is the
responsibility of the user.
There are 2 possibilities to connect the inverter to the Internet:
- With Ethernet cable RJ45
- With Wi-Fi
FR
FR
EN
ES
c
Choice 1 : Ethernet Cable RJ45

7.1 Configuration for Ethernet connection

1. Connect the inverter with an Ethernet cable
(RJ45) from "ETH" port to an access point.
2. Check if the DEL of « ETH » port are blinking
3. On a PC connected to the same Ethernet
network, through the network explorer, check
if an IMEON device is displayed.
4. The inverter is connecter to the access point.
Go to the web portal identification step.
86
Manuel d'installation / Installation guide IMEON Inverter/ Guia de montaje – Rev C.14
IMEON INVERTER
Choice 2 : Wi-Fi