IMEON ENERGY 3.6 Manuel D'installation page 73

IMEON INVERTER
3.10.1 AC BACKUP Connection for IMEON 3.6
Step 1 : Wire the connector as defined in paragraph 3.3.
Step 2: Make sure the wires are securely connected.
Step 3: Plug the RST Connector in the AC BACKUP socket.
WARNING: Before plug-in in the cable, make sure there is no load on the circuit connected to
the AC BACKUP.
WARNING: AC BACKUP cannot be connected in parrallel to another IMEON and should not be
connected to the grid.
3.10.2 AC BACKUP Connection for IMEON 9.12
Step 1 : Wire the connector as defined in paragraph 3.3.
Step 2: Make sure the wires are securely connected.
Step 3: Plug the RST Connector in the AC BACKUP socket.
WARNING: Before plug-in in the cable, make sure there is no load on the circuit connected to
the AC BACKUP.
WARNING: AC BACKUP cannot be connected in parrallel to another IMEON and should not be
connected to the grid.
Manuel d'installation / Installation guide IMEON Inverter/ Guia de montaje – Rev C.14
FR
FR
EN
ES
73