Annex 3 : Maximum Peak Power Calculation - IMEON ENERGY 3.6 Manuel D'installation

IMEON INVERTER

Annex 3 : Maximum peak power calculation

Some devices will require a higher start-up power than the operating power. This specificity must be
considered.
Peak power = Equipment nominal power × start-up coefficient
See below some example of equipments showing difference between the operation power and the
minimum acceptable power for the inverter.
Equipment
Electric oven
Television
Portable
grinder
Circular saw
Freezer
Single phase
compressor
Washing
machine
To identify the exact power of your equipment, please consult the manufacturer datasheets on the
device manual.
Note: Calculations have been done for mono-phase devices.
IMEON 3.6 : Overload power capability at nominal voltage (AC
BACKUP)*
* It is necessary to take into account all technical specifications.
Manuel d'installation / Installation guide IMEON Inverter/ Guia de montaje – Rev C.14
Operating power Start-up Coefficient
2 500 W
300 W
900 W
1 100 W
300 W
1 500 W
3 000 W
IMEON 9.12 : Overload power capability at nominal
Maximum peak power
1 2 500 W
1 300 W
2,5 2 250 W
2,5 2 750 W
3,5 1 050 W
3,5 5 250 W
3,5 10 500W
voltage (AC BACKUP)*
FR
FR
EN
ES
103