Os One : Inverter Configuration; Imeon Online; Account Creation; Using The Interface - IMEON ENERGY IMEON 3.6 Guide D'installation

3. OS ONE : Inverter configuration

Each inverter must be configured separately using the OS.ONE interface (please refer to IMEON 3.6
and IMEON 9.12 guide to OS.ONE access information).

The software and firmware versions of the inverters must be identical,

The inverters must have their dates and times up to date and identical,

Operational settings must be identical:
FR
EN
IT

4. IMEON Online

4.1 Account creation

- Go to monitoring.imeon-energy.com,
- Log in with your login and password,
- Create a user account by clicking on
- Fill in the personal information and the information related to the installation,
- In the information related to the installation, fill in the inverter model and a serial number,
- Add the serial numbers of the other installed inverters by clicking on
- Save the account.
4.2

Using the interface

Go to the monitoring.imeon-energy.com website and log in with your login and password.
You will then be able to visualize the performance of your installation.
Parallel mounting - Installation Guide IMEON - Rev 3.1
IMEON PARALLEL
Flow management:
o Mode of operation
o Compliance
o Injection authorization
o Max power
o Date / time
The Battery :
o Technology
o Dischargeonly at night
o Same settings on chargingcontroller (if used)
o Max current of charge by the network
o Min SOC without network presence
o Min SOC in presence of the grid
Network Management :
o Activate AC backup
16