General Conditions - IMEON ENERGY IMEON 3.6 Guide D'installation

1. General conditions

BEFORE STARTING: Read this manual carefully, it will guide you through the installation before you
start using the system.
This guide completes IMEON 3.6/9.12 installation guide available on the IMEON ENERGY website
(https://imeon-energy.com). The purpose of this guide is to describe the particularities related to parallel
configuration.
modified on an ongoing basis without notice.
Please refer to the IMEON ENERGY website (https://imeon-energy.com) for the latest version.
The images in this document are for illustration purposes only and may differ from reality.
CAUTION: This guide is intended for specialized installers with extensive knowledge and
experience in the installation of self-consumption systems and in the distribution of electricity. It is
strictly forbidden to install (or dismantle) this system if the required skills are not acquired.
The installation must be carried out in accordance with the regulations in force.
FR
The supplier cannot be held responsible for damage resulting from improper maintenance or failure to
follow the instructions in this installation manual. It is necessary to respect the conditions of use and
EN
assembly of the inverters, available on our website.
IT
Note: IMEON does not always guarantee compliance with local regulations. Before commissioning,
please check that the applicable local requirements correspond to the parallel connection solution.
Inverters can be parallelizable up to 6 units for the IMEON 3.6 and IMEON 9.12. Electrical protections
must be adapted to the power of the installation according to the quantity of inverter and battery.
Parallel mounting - Installation Guide IMEON - Rev 3.1
IMEON PARALLEL
In the interest of continuous improvement, the content of this document is reviewed and
12