Electrical Connection - IMEON ENERGY 3.6 Guide De Montage

2. Place the wall plate against the surface and fix it with the appropriate screws
3. Fit and fix with screws the IMEON on the wall plate and verify that the inverter is fixed securely.

3.3 Electrical connection

FR
WARNING: To prevent any risk of electric shock, make sure that the ground cable is correctly
FR
EN
connected to the earth ground before switching on and using the inverter.
ES
Source
IT
PV
Grid
Battery
AC BACKUP
Earth
WARNING: These values are provided solely for guidance. It is necessary to calculate again
the cable cross section, according to the current and to the cable length.
58
IMEON INVERTER
Designation Connector
PV1 + + (type MC4)
PV1 - - (type MC4)
PV2 + + (type MC4)
PV2 - - (type MC4)
Earth
/ PE (type RST)
N N (type RST)
L1 1/L1 (type RST)
L2 2 (type RST)
L3 3 (type RST)
BAT + POS +
BAT - NEG -
Earth
/ PE (type RST)
N N (type RST)
L1 1/ L (type RST)
L2 2 (type RST)
L3 3 (type RST)
Earth Earth
IMEON_installation_guide_rev.D.5
Suggestion of cable
for IMEON 3.6
6mm² stranded cable
4mm² solid cable
4mm² stranded cable
33mm² stranded cable
2,5 mm² stranded cable
6mm² stranded cable
4mm² solid cable
Suggestion of cable
for IMEON 9.12
6mm² stranded cable
6mm² solid cable
4mm² stranded cable
95mm² stranded cable
1,5 mm² stranded
cable
6mm² stranded cable
4mm² solid cable