Annex 5 : Ip Address Modification - IMEON ENERGY 3.6 Guide De Montage

Annex 5 : IP address modification

The PC / Tablet / Smartphone used for connecting to inverter Wi-Fi has to be configured with an
automatic IP (DHCP).
If the connection is established but the access to the identification page is unavailable, that means the
PC / Tablet / Smartphone is configured with a fixed IP. It is necessary to change the Wi-Fi parameters.
Go to the « Network Settings»
FR
FR
EN
ES
Click on the connected IMEON SSID
IT
In the « Wi-Fi status»window, click on Properties
In the « Wireless network connection
properties »window, double-click on« Internet
Protocolversion 4 (TCP/IPv4) »
Please note and save information from the « Internet
Protocol (TCP/IPv4) property » window, they will be re-
used aftertheinverter is disconnected.
Choose to:
- Obtain an IP address automatically
- ObtainDNS server address automatically
The Wi-Fi properties are now correctly configured. Continue to the identification page.
Warning: After disconnection of the PC / Tablet / Smartphone from the IMEON, it is necessary to
configure the Wi-Fi properties by entering the five IP addresses saved previously.
94
IMEON INVERTER
IMEON_installation_guide_rev.D.5