Configuration For Ethernet Connection; Configuration For Wi-Fi Connection; Web Portal Identification - IMEON ENERGY 3.6 Guide De Montage

7.1 Configuration for Ethernet connection

1. Connect the inverter with an Ethernet cable
(RJ45) from "ETH" port to an access point.
2. Check if the DEL of « ETH » port are blinking
3. On a PC connected to the same Ethernet
network, through the network explorer, check
if an IMEON device is displayed.
4. The inverter is connecter to the access point.
Go to the web portal identification step.
FR

7.2 Configuration for Wi-Fi connection.

FR
EN
1- Connect to IMEON OS. ONE, then click on WiFi icon
ES
2- Press "Update list" to scan and display the list of Wi-Fi networks available for the inverter.
3- In the list of identified networks, click on your network to select it.
IT
4- Enter the network key (if required), then click on "Connect".
5- The name of the Wi-Fi network selected is displayed on « Last configured Wifi access » and
the status is « connected »

7.2.1 Web portal Identification

The URL to access IMEON ONLINE portal is:
monitoring.imeon-energy.com
Log in with the information (email address and password) you received by email when the installer
created the user account, then press "Login".
If no account has been created, contact your installer.
7.2.2 Description of IMEON ONLINE
7.2.3 Dashboard
The homepage is the same as one ofIMEON OS. ONE. It allows viewing the real time distribution of
the energy sources feeding the load, as well as the evolution of the self-production rate, the status of
the battery and the overview of the energy flow.
7.2.4 My account
Allows viewing and modifying the user information and information related to the system.
80
IMEON INVERTER
IMEON_installation_guide_rev.D.5
on the bottom of the interface.