IMEON ENERGY 3.6 Guide De Montage page 51

IMEON INVERTER
controls will not reduce this risk. Internal capacitors may remain charged for 5 minutes
after disconnecting all sources of power.
WARNING: Do not cover IMEON. It is fitted with a heat removal system to avoid any
overheating.
WARNING: Do not disassemble IMEON yourself. It contains no user-serviceable parts.
Attempt to service IMEON yourself may cause a risk of electrical shock or fire and will
void the warranty from the manufacturer.
WARNING: To avoid a risk of fire and electric shock, make sure that existing wiring is in
good condition and that the wire is not undersized.
WARNING: To avoid electromagnetic disturbance between power cables and
communication cables, it is necessary to separated them physically and using shielded
cable for communication cable.
The power connectors must never be touched (including power off).
IMEON ENERGY is not responsible for any damages caused by bad maintenance and/or not
respecting the specific instructions of this manual.
IMEON_installation_guide_rev D.5
FR
FR
EN
ES
IT
51