Button Definition - IMEON ENERGY 3.6 Guide De Montage

IMEON INVERTER
Indicator
/
* The data is displayed for information purposes only.

4.2 Button definition

Button
Short pressure :
>Change the indicators clockwise.
>Change the unit of the selected indicator.
Long pressure (>3sec):
> Display of the inverter‟s software version and IP address
Short pressure:
> Change the indicator counterclockwise.
>Change the unit of the selected indicator.
Long pressure (>3sec):
> Display of the error codes
> Select the indicator.
> Confirm the choice of the indicator.
> Hold the button for 3 seconds until the buzzer sounds to activate the AC
BACKUP.
> Go back to the previous indicator or exit the indicator.
> Hold the button for 3 seconds until the buzzer sounds to deactivate the AC
BACKUP.
Indicates the battery state of charge.
-
/
-
-
Indicates that the AC BACKUP is activated and
the delivery of power to the load.
Indicates the DC/AC conversion power level
Indicates an overload on AC BACKUP
Security Load : Indicates consumers are
connected on AC BACKUP
Indicates thatIMEON is up and running
Indicates an error in the system
Function
IMEON_installation_guide_rev D.5
Detail
Left icon : battery fully charged
Center icon: If the icon flashes, that means
the battery is unavailable
Right icon: battery has a low voltage
FR
FR
EN
ES
IT
69