Publicité
Les langues disponibles
Les langues disponibles
Care & Maintenance
Digital Heart Rate Monitor
To avoid build up of materials that can interfere with the Digital Heart
v
Rate Monitor's ability to receive a valid pulse, rinse the Digital Heart
Rate Sensor with fresh water
Do not clean the Digital Heart Rate Monitor sensor or chest strap with
v
abrasive or corrosive materials. Abrasive cleaning agents may scratch
the plastic parts and corrode the electronic circuit.
Do not subject the Digital Heart Rate Monitor to excessive force,
v
shock, dust, temperature, or humidity. Such treatment may result
in malfunction, a shorter electronic life span, damaged batteries, or
distorted parts.
Do not tamper with the Digital Heart Rate Monitor's internal
v
components. Doing so will terminate the Monitor's warranty and may
cause damage.
The Digital Heart Rate Monitor contains no user-serviceable parts,
v
except batteries.
36
Battery
Heart Rate Sensor Battery
If your heart rate readings become erratic or stop, you may need to
replace the battery on your heart rate sensor. You can change the battery
yourself without any special tools.
This product uses a CR2032 lithium battery for the heart rate sensor. To
change the battery:
BATTERIA
APRIRE
BATTERIA
1. Open the transmitter battery lid with a coin, turning the coin
counterclockwise.
2. Replace the battery with a new CR2032, 3V lithium battery with (+)
facing you, taking care not to touch the two contacts and discharge
the battery.
3. When you have finished inserting the battery, replace the lid and with
a coin — turn or tighten it in a clockwise direction.
37
Publicité
