Listening To An External Source - Teac PL-D2000 Manuel Du Propriétaire

Table des Matières

Publicité

120
Other Functions (3)

Listening to an External Source

If other audio component(s) are connected
to this system (see page 24), you can enjoy
external source.
AUX (1/2)
1 Press the AUX button and select "AUX1"
or "AUX2".
2 Operate the unit which is connected to
this system.
3 Adjust the volume level by pressing the
VOLUME/ADJ (b/5) buttons.
This system is built in Dolby Pro Logic
VOLUME/ADJ
decoder, so you can enjoy the live sound
in Dolby Surround. How to operate, see
"Selecting Listening Modes" below.
Selecting Listening Modes
Note
< This function is only available for Tuner
and AUX (i.e. external source).
LISTENING
When listening to the radio or external
source, press the LISTENING button
repeatedly to select the following listening
modes cyclically.
Pro Logic Normal w Pro Logic Phantom w
Pro Logic Wide w 3-Stereo Normal w
3-Stereo Wide w Stereo.
The relevant indicators appear on the front
panel display.
Notes
< Before pressing the LISTENING button,
you'd better lower the volume level.
< If the audio source is mono, you'd better
set the listening mode to "Stereo" than
the others.
ENGLISH
Autres fonctions (3)
L'écoute d'une source externe
Si d'autre composant(s) audio(s) sont
branché(s) à ce système (voir page 24), vous
pouvez les utiliser.
1 Appuyer sur la touche AUX pour choisir
"AUX 1" ou "AUX2".
2 Opérer l'appareil qui est branché à ce
système.
3 Régler le volume en appuyant sur les
touches VOLUME/ADJ (b/5).
Ce système incorpore un décodeur Dolby
Pro Logic, vous permettant de jouir du
son d'ambiance Dolby. Pour l'opération
voir "Choix des modes d'écoutes|" ci-
dessous.
Choix des modes d'écoutes
Remarque
< Cette fonction est disponible seulement
que pour Tuner et AUX (i.e. sources
externes).
Durant l'écoute du radio ou source externe,
appuyer sur la touche LISTENING
répététivement pour choisir cycliquement
les modes d'écoute qui suivent:
Pro Logic Normal w Pro Logic Phantom w
Pro Logic Wide w 3-Stereo Normal w
3-Stereo Wide w Stereo.
L'indicateur approprié apparait sur
l'afficheur du panneau avant.
Remarque
< Avant d'appuyer sur la touche LISTENING,
il est préférable de baisser le volume.
< Si la souce audio est mono, il est
préférable de régler le mode d'écoute en
position "Stéréo".
FRANÇAIS

Publicité

Table des Matières
loading

Table des Matières