ESAB ESP-101 Manuel D'instruction page 279

sectIoN 6
dANGeR
dANGeR
6.1 troubleshooting
Check the problem against the symptoms in the following troubleshooting guide. The remedy may be quite
simple. If the cause cannot be quickly located, shut off the input power, open up the unit, and perform a simple
visual inspection of all the components and wiring. Check for secure terminal connections, loose or burned wir-
ing or components, bulged or leaking capacitors, or any other sign of damage or discoloration.
The cause of control malfunctions can be found by referring to the sequence of operations, electrical schematics
and checking the various components. A volt-ohmmeter will be necessary for some of these checks.
electRIc shock cAN kIll! Be suRe thAt All pRImARy poWeR to
the mAchINe hAs BeeN exteRNAlly dIscoNNected. opeN the
lINe (WAll) dIscoNNect sWItch oR cIRcuIt BReAkeR BefoRe At-
temptING INspectIoN oR WoRk INsIde of the poWeR souRce.
voltAGes IN plAsmA cuttING equIpmeNt ARe hIGh eNouGh
to cAuse seRIous INjuRy oR possIBly deAth. Be pARtIculARly
cAReful ARouNd equIpmeNt WheN the coveRs ARe Removed.
279
tRouBleshootING