Attachments; Accessoires; Switching System With; Magnetic Fi Eld Sensors - Bosch Rexroth CKK Serie Manuel D'instructions

Masquer les pouces Voir aussi pour Rexroth CKK Serie:
Table des Matières

Publicité

R320103982 (2009.08)
Instructions CKK
4.

Attachments

F If desired, the following compo-
nents can be premounted by Bosch
Rexroth AG, ready for use by the cus-
tomer. They can also be retrofi tted at
any time.

4.1 Switching system with

magnetic fi eld sensors
(all sizes)
1 Socket and plug
2 Magnetic fi eld sensor
2a Magnetic fi eld sensor with plug
3 Mounting duct
4.2 Switching system with
mechanical or proximity
switches
(only for CKK 25-200
(when using a connecting
plate)
4 Mechanical switch
5
Proximity switch
6
Connecting plate
F The two switching systems cannot
be mounted together on one side!
4.3

Drive

7 Motor
8 Timing belt side drive
9 Motor mount and coupling
4.

Accessoires

F Sur demande, les composants
suivants peuvent être montés en usine
chez Bosch Rexroth AG. Un rééquipe-
ment est possible à tout moment.
4.1 Système de commutation et
capteur de champ magnétique
(toutes tailles)
1 Prise et fi che
2 Capteur de champ magnétique
2a Capteur de champ magnétique
et fi che
3 Chemin de câbles
4.2 Système de commutation
avec interrupteurs mécani-
ques ou inductifs
(pour le CKK 25-200 avec
une plaque de liaison
uniquement)
4
Interrupteur mécanique
5
Interrupteur inductif
6
Plaque de liaison
F Les deux systèmes de commu-
tation ne peuvent pas être montés
ensemble sur un seul côté !
4.3
Entraînement
7 Moteur
8 Renvoi par poulies et courroie
9 Lanterne et accouplement
Bosch Rexroth AG
4.
Accessori
F A richiesta possono essere montati
presso la Bosch Rexroth AG i seguenti
componenti pronti per l'uso. È altrettanto
possibile procedere in qualsiasi momento
ad un montaggio successivo.
4.1 Sistema con sensore
magnetico
(tutte le grandezze)
1 Presa con spina
2 Sensore magnetico
2a sensore magnetico con spina
3 Canalina di fi ssaggio
4.2 Sistema interruttori con
interruttori meccanici ovvero
induttivi
(solo CKK 25-200 con
uso della piastra di
accoppiamento)
4 Interruttore meccanico
5
Interruttore induttivo
6
Piastra di accoppiamento
F I due sistemi interruttori non posso-
no essere montati insieme su un lato!
4.3
Azionamento
7 Motore
8 Trasmissione a cinghia e puleggia
9 Flangia e giunto
13

Publicité

Table des Matières
loading

Table des Matières