Electric Connection - Arneg Bergen 2 Manuel D'installation Et De Service

What to avoid
First cleaning • gently remove the protective film, eliminate glue residues with suitable sol-
• carry out the first cleaning using neutral products, dry with a soft cloth.
CAUTION! Discarded packing parts. Injury.
DO NOT leave packing parts (nails, wood, staples, etc.) and tools used for the operation
(pliers, scissors, etc.) in the working area.
These objects must be removed with appropriate means and taken to their respective col-
lection places.
i
For correct disposal, the package consists of:
wood - Polystyrene - Polythene - PVC - cardboard.

14. Electric connection

DANGER! Live parts. Electrocution.
REMOVE THE ELECTRIC POWER SUPPLY BEFORE ANY OPERATION!
ensure that the casing does not come into contact with the electrical panel.
Provide a suitable grounding system!
i
The systems must be set up in accordance to the norms that regulate manufacture, installa-
tion, use, and maintenance foreseen by the norms in force in the country where the refrigera-
tion system is installed.
To ensure normal operation, the maximum variation of the voltage must range between +/-
6% of the nominal value.
Liability
05060176 00 11-09-2018
DO NOT install the cabinet (Fig.7):
- in areas at risk of explosion
- in open air and therefore subjected to atmospheric agents
- near heat sources (direct sunlight, heating systems, incandescence
lamps, etc.)
- in the vicinity of air currents (close to doors, windows, air-conditioning
systems, etc.) that exceed a speed of 0.2 m/s.
DO NOT move the cabinet by levering on the perimeter walls.
Dragging. Collapsing/deformations/tearing
DO NOT drag/push the cabinet
DO NOT use the glass panels for attachment/support/grip
Observe the indications regarding safe handling
vents.
DO NOT use alcohol to clean the methacrylate (Plexiglas) parts
DO NOT use abrasives or metal sponges
Customer provide a power line to the cabinet connection point.
Installer provide the anchoring devices for all the wires in input and out-
put to/from the cabinet.
ARNEG ARNEG S.p.A. denies all liability with respect to the user or third
parties for:
- damages caused by failures or malfunction of the systems
installed upstream of the cabinet
- damages to the cabinet due to causes arising directly from
malfunction of the electrical system
Bergen 2
English
35