Transport; Storage - Arneg Bergen 2 Manuel D'installation Et De Service

18 class of protection against humidity
19 QR code
20 operating current consumption
21 operating electrical power absorbed in the refrigeration phase (fans+hot wires+lighting)
22 Power supply frequency
i
For assistance, communicate the following to the manufacturer:
- the product name (2); the serial number (4); the job order number (16)
NEVER remove the serial number plate under any circumstances

11. Transport

WARNING! Heavy object. Crushing
The handling area should be free of persons and objects.
The loading-unloading operations must be performed by qualified personnel that are able to
verify weights, the exact points for lifting (without piping, cables, electrical panels, etc.) and
the most suitable means, both in terms of safety and lifting capacity.
The cabinets come with a frame-platform in wood fixed to the base for their displacement with forklifts:
Features of the Use a forklift:
- with suitable specifications in compliance with applicable standards
forklift
- NOT worn/damaged
stacker crane
- manual or electrical suitable for lifting the cabinet, with a nominal capacity
- with compliant and NON worn cables
Safe handling • make sure there are no foreign objects within the handling area
• always place the lifting brackets in the indicated points
(how to pro-
• always introduce the brackets completely
ceed)
• balance the weight of the unit so as to ensure that the load remains balanced (Fig.9)
i
DO NOT use transportation procedures other than those indicated.

12. Storage

Remedy • store the furniture in indoor environments, suitably ventilated (according to
• before storing, check that the packaging is intact and without defects to avoid
What to avoid
05060176 00 11-09-2018
greater than or equal to 1000 kg
WARNING! Heavy object. Crushing
Observe the indications regarding safe handling
Dragging. Collapsing/deformations/tearing
DO NOT drag/push the cabinet
DO NOT use the glass panels for attachment/support/grip
Observe the indications regarding safe handling
the laws of the country of installation), with a temperature of between -25°C
and + 55°C and an air humidity of between 30% and 90%.
compromising storage of the cabinets.
UV rays. Permanent deformation of plastic materials /damage of cabi-
net parts.
DO NOT store the cabinets in uncovered areas exposed to atmospheric
agents and to direct sunlight.
Bergen 2
English
33