Residual Risks - Ryobi RLM46160S Traduction Des Instructions Originales

■ Remove the handle knobs and bolts from each side of
the lower handle at the handle bracket, (mounted on
the mower deck).
■ Fully loosen the handle knobs on the sides of the
handle and fold the upper handle down.
■ Push inward on each side of the lower handle, and
lift the sides of the lower handle past the edges of the
handle mounting brackets.
■ Fold the lower handle forward, making sure not to bend
or kink the control cables.
TRANSPORTATION
■ Stop the product, disconnect the spark plug wire, and
wait until the blade comes to a complete stop. Allow
the product to cool down before storing or transporting.
■ Clean all foreign materials from the product. Store the
product in a cool, dry, and well-ventilated place that
is inaccessible to children. Keep away from corrosive
agents such as garden chemicals and de-icing salts. Do
not store outdoors.
■ For transportation in a vehicle, secure the product
against movement or falling to prevent injury to persons
or damage to the product.
WARNING
Use extreme caution when lifting or tilting the product for
maintenance, cleaning, storage, or transportation. The
blade is sharp, keep all body parts away from the blade
while it is exposed.

RESIDUAL RISKS

Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise during use, and
the operator should pay special attention to avoid the
following:
■ injury caused by vibration
– Always use the right tool for the job. Use designated
handles and restrict working time and exposure.
■ injury caused by noise
– Exposure to noise can cause hearing injury. Wear
ear protection and limit exposure.
■ injury from contact with the blades
■ injury caused by thrown objects
RISK REDUCTION
It has been reported that vibrations from handheld tools
may contribute to a condition called Raynaud's Syndrome.
Symptoms may include tingling, numbness, and blanching
of the fi ngers, usually apparent upon exposure to cold.
Hereditary factors, exposure to cold and dampness, diet,
smoking, and work practices are all thought to contribute to
the development of these symptoms. There are measures
that can be taken by the operator to possibly reduce the
effects of vibration:
■ Keep your body warm in cold weather. When operating
the product, wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
■ After each period of operation, exercise to increase
blood circulation.
■ Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your physician.
WARNING
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.
SYMBOLS
Some of the following symbols may be used on this
product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the
product better and safer.
Precautions that involve your safety.
To reduce the risk of injury, user must
read and understand operator's manual
before using this product.
To avoid injury, stay away from moving
parts at all times.
Danger! Keep hands and feet away.
Danger of Ricochet. Keep all
bystanders at least 15 m away.
Before performing maintenance,
remove the spark plug socket.
Remove objects that could be thrown by
STOP
the rotating blade.
Keep bystanders at a safe distance
away from the product.
EN
English
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
9